ChipSelect

• Chips by feature
• Chips by Vendor
• about
• login

Vendor Web: NXP Semiconductors

download svd file

All devices of this Vendor

Name : S32K116

Flash : 160 kB

Flash bank : 0x20000 Bytes @ 0x0

Flash bank : 0x8000 Bytes @ 0x10000000

RAM : 15 kB

RAM : 0x00003C00 Bytes @ 0x00003C00

description : S32K116 NXP Microcontroller

Architecture

Architecture : ARM Cortex-M0+ (CM0PLUS)

revision : r0p0

endian : little

Number of relevant bits in Interrupt priority : 2

Peripherals

name : ADC0
description : Analog-to-Digital Converter
base address : 0x0
Interrupt (28) ADC0

name : AIPS
description : AIPS-Lite Bridge
base address : 0x0

name : CAN0
description : Flex Controller Area Network module
base address : 0x0
Interrupt (10) CAN0_ORed_Err_Wakeup
Interrupt (11) CAN0_ORed_0_31_MB

name : CMP0
description : High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
base address : 0x0
Interrupt (29) CMP0

name : CMU_FC_0
description : CMU_FC
base address : 0x0

name : CMU_FC_1
description : CMU_FC
base address : 0x0

name : CRC
description : Cyclic Redundancy Check
base address : 0x0

name : CSE_PRAM
description : CSE_PRAM
base address : 0x0

name : DMA
description : Enhanced Direct Memory Access
base address : 0x0
Interrupt (0) DMA0
Interrupt (1) DMA1
Interrupt (2) DMA2
Interrupt (3) DMA3
Interrupt (4) DMA_Error

name : DMAMUX
description : DMA channel multiplexor
base address : 0x0

name : EIM
description : Error Injection Module
base address : 0x0

name : ERM
description : ERM
base address : 0x0
Interrupt (5) ERM_fault

name : FLEXIO
description : The FLEXIO Memory Map/Register Definition can be found here.
base address : 0x0
Interrupt (25) FLEXIO

name : FTFC
description : FTFC
base address : 0x0
Interrupt (18) FTFC

name : FTM0
description : FlexTimer Module
base address : 0x0
Interrupt (12) FTM0_Ch0_7
Interrupt (13) FTM0_Fault
Interrupt (14) FTM0_Ovf_Reload

name : FTM1
description : FlexTimer Module
base address : 0x0
Interrupt (15) FTM1_Ch0_7
Interrupt (16) FTM1_Fault
Interrupt (17) FTM1_Ovf_Reload

name : LMEM
description : Local Memory Controller
base address : 0x0

name : LPI2C0
description : The LPI2C Memory Map/Register Definition can be found here.
base address : 0x0
Interrupt (24) LPI2C0_Master_Slave

name : LPIT0
description : Low Power Periodic Interrupt Timer (LPIT)
base address : 0x0
Interrupt (20) LPIT0

name : LPSPI0
description : The LPSPI Memory Map/Register Definition can be found here.
base address : 0x0
Interrupt (26) LPSPI0

name : LPTMR0
description : Low Power Timer
base address : 0x0
Interrupt (8) LPTMR0

name : LPUART0
description : Universal Asynchronous Receiver/Transmitter
base address : 0x0
Interrupt (31) LPUART0_RxTx

name : LPUART1
description : Universal Asynchronous Receiver/Transmitter
base address : 0x0
Interrupt (30) LPUART1_RxTx

name : MCM
description : Core Platform Miscellaneous Control Module
base address : 0x0

name : MPU
description : Memory protection unit
base address : 0x0

name : MSCM
description : MSCM
base address : 0x0

name : MTB_DWT
description : MTB data watchpoint and trace
base address : 0x0

name : PCC
description : PCC
base address : 0x0

name : PDB0
description : Programmable Delay Block
base address : 0x0
Interrupt (19) PDB0

name : PMC
description : PMC
base address : 0x0
Interrupt (21) SCG_CMU_LVD_LVWSCG

name : PORTA
description : Pin Control and Interrupts
base address : 0x0

name : PORTB
description : Pin Control and Interrupts
base address : 0x0

name : PORTC
description : Pin Control and Interrupts
base address : 0x0

name : PORTD
description : Pin Control and Interrupts
base address : 0x0

name : PORTE
description : Pin Control and Interrupts
base address : 0x0

name : PTA
description : General Purpose Input/Output
base address : 0x0

name : PTB
description : General Purpose Input/Output
base address : 0x0

name : PTC
description : General Purpose Input/Output
base address : 0x0

name : PTD
description : General Purpose Input/Output
base address : 0x0

name : PTE
description : General Purpose Input/Output
base address : 0x0

name : RCM
description : Reset Control Module
base address : 0x0
Interrupt (23) RCM

name : RTC
description : Secure Real Time Clock
base address : 0x0
Interrupt (6) RTC
Interrupt (7) RTC_Seconds

name : S32_NVIC
description : Nested Vectored Interrupt Controller
base address : 0x0
Interrupt (0) DMA0
Interrupt (1) DMA1
Interrupt (2) DMA2
Interrupt (3) DMA3
Interrupt (4) DMA_Error
Interrupt (5) ERM_fault
Interrupt (6) RTC
Interrupt (7) RTC_Seconds
Interrupt (8) LPTMR0
Interrupt (9) PORT
Interrupt (10) CAN0_ORed_Err_Wakeup
Interrupt (11) CAN0_ORed_0_31_MB
Interrupt (12) FTM0_Ch0_7
Interrupt (13) FTM0_Fault
Interrupt (14) FTM0_Ovf_Reload
Interrupt (15) FTM1_Ch0_7
Interrupt (16) FTM1_Fault
Interrupt (17) FTM1_Ovf_Reload
Interrupt (18) FTFC
Interrupt (19) PDB0
Interrupt (20) LPIT0
Interrupt (21) SCG_CMU_LVD_LVWSCG
Interrupt (22) WDOG
Interrupt (23) RCM
Interrupt (24) LPI2C0_Master_Slave
Interrupt (25) FLEXIO
Interrupt (26) LPSPI0
Interrupt (28) ADC0
Interrupt (29) CMP0
Interrupt (30) LPUART1_RxTx
Interrupt (31) LPUART0_RxTx

name : S32_SCB
description : System Control Registers
base address : 0x0

name : S32_SysTick
description : System timer
base address : 0x0

name : SCG
description : System Clock Generator
base address : 0x0
Interrupt (21) SCG_CMU_LVD_LVWSCG

name : SIM
description : System Integration Module
base address : 0x0

name : SMC
description : System Mode Controller
base address : 0x0

name : TRGMUX
description : TRGMUX
base address : 0x0

name : WDOG
description : Watchdog timer
base address : 0x0
Interrupt (22) WDOG